smart start

[phillbl]

Hello,

I am trying to create an ISO of a start smart cd 7.80. I have created one using using nero and another 3rd party app but it does not seem to work. am i doing something wrong?

thanks

phil

[sanesh vig]

what is the model of the server for which you need smart start cd?

Please specify the OS as well

[James ~ Happy Dude]

Hello Phil,
Y 7.80 when SS 7.91 is available here :
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=uk&prodTypeId=15351&prodSeriesId=1121516&prodNameId=3288134&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-1c11694001fb4c31b3c1c04b27

For which server are u trying to use this ?
Do you get any specific errors ?

Burning this ISO image is quite simple no special tactics required.

Regards.

[phillbl]

the model is 585 and the OS is 64bit windows 2003

thanks

[Torsten.]

You did **create** an ISO image - from what?


The ready-to-burn images are available for download, e.g. this:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=0&prodSeriesId=3219233&swItem=MTX-1c11694001fb4c31b3c1c04b27&prodNameId=3288112&swEnvOID=1005&swLang=8&taskId=135&mode=4&idx=1

smartstart-7.91-0.zip (558 MB)

[phillbl]

hi,

the software used was undisker 1.6

[Torsten.]

What means "does not work"?

Does not boot?

Looks like your "extract ISO" software does only extract the data part, but not the boot part of the disk.

You can try to use the "hpusbkey" tool to "copy" a disk to an usb stick and add additional files.

[phillbl]

it boots but when i try to start the software it comes up with an error

<0>Kernel panic: Attempt to kill init!

[phillbl]

i need an ISO as i am try to build the server remotley and i do not have a cd in the server. i tried copying the files but i alway get a few access denied error when trying to copy smart start.

i am dowloading the 7.91 ISO so this should work?

[Jimmy Vance]

If you accesing the system remotely over iLO, Download the ISO image to the system you using to access iLO, launch the virtual media applet in iLO and select the virtual CD/DVD-ROM, click the local image file radio button and browse to where you have the .iso image and click the connect button. No need to burn the media, the iLO virtual media applet can use the iso image.