ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

smartcli command to update all firmware components except HPE Mellanox Ethernet only adapter

Thiyagu1093
Occasional Contributor

smartcli command to update all firmware components except HPE Mellanox Ethernet only adapter

Hi Team,

We are looking for a way to update all firmware component except one firmaware component[i.e Mellanox Ethernet card].

We removed the ethernet card's signature file from ISO-packages dir and used -skip_missing_compsig as follows, but no luck.


sudo ./smartupdate --s --f:rom --target <nodeip> --user "<username>" --passwd "<pwd>" --skip_missing_compsig --use_location "<iso_path>/packages/
sudo ./smartupdate --s --f:rom --skip_missing_compsig --target <nodeip> --user "<username>" --passwd "<pwd>" --use_location "<iso_path>/packages/"
sudo ./smartupdate --s --skip_missing_compsig --romonly --target <nodeip> --user "<username>" --passwd "<pwd>" --use_location "<iso_path>/packages/"

We would be grateful if you could help us with the smartupdate cli command to update update all firmware components except Mellanox Ethernet card.

 

Thanks,

Thiyagu

1 REPLY
Naveen_G
HPE Pro

Re: smartcli command to update all firmware components except HPE Mellanox Ethernet only adapter

Use a custom baseline, or ISO to deploy specific updates. HPE Mellanox Ethernet should be de-selected during custom baseline creation to keep it out from the update. Please refer to SUM user guide https://support.hpe.com/hpsc/doc/public/display?docId=a00040556en_us , page 37 on "Creating a custom baseline and ISO".

I am an HPE Employee
If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.