HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

snmp community name of DL320 G5 running cisco cucm 6.1

 
Rogier Boeken
Frequent Advisor

snmp community name of DL320 G5 running cisco cucm 6.1

hi
i am running a cisco cucm 6.1 on 2x hp dl320 G5

i have a rilo card installed on this server

i have configured a monitoring application to pull the ambient temperature from the rilo card by checking the snmp oid 10.3.6.1.4.1 instance 232.6.2.6.8

this works fine for all my other servers as i know the exact snmp community name

but i do not know what the snmp community name is for this DL320 G5 so it does not work

i have tried the default public but this does not work,

would anyone know how you can figure out what hte snmp read community name is on a dl320 g5 if you are running cisco cucm 6.1 (which is basically linux based)

many thanks
rogier
2 REPLIES
David Claypool
Honored Contributor

Re: snmp community name of DL320 G5 running cisco cucm 6.1

Look in the snmpd.conf file.
Rogier Boeken
Frequent Advisor

Re: snmp community name of DL320 G5 running cisco cucm 6.1

thanks, i tried looking into the file but i don't think i have the correct permissions for this box (integrator did the installation for me on this box) and i am not linux savy enough to cd my way to the correct path and read the snmpd.conf file

thanks for pointing me into the right direction though