Community
ProLiant Servers (ML,DL,SL)
cancel
turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

there are no configurable physical drives attached to the current array controller

MarkoCupic
MarkoCupic
Occasional Visitor

‎10-22-2014 06:15 AM

‎10-22-2014 06:15 AM

there are no configurable physical drives attached to the current array controller

Hi

Yesterday I just bought a new proLiant DL380 G9 Server and 2x SAS 300GB 10K (SN: 653955).

When I run the Array Configuration Utility, I get the following message:

 

"There are no configurable physical drives attached to the current array controller"

 

Does anybody has the same behavior?

 

Greetz Marko

 

0 Kudos
Reply
2 REPLIES
cykVM
cykVM
Frequent Advisor

‎10-22-2014 09:55 PM

‎10-22-2014 09:55 PM

Re: there are no configurable physical drives attached to the current array controller

I would first check if the drives are attached to the RAID controller or probabyl are connected to the onboard (non-RAID) controller. Secondly I would run the latest SPP to update firmware/BIOS of the server (if not already done).

 

 

0 Kudos
Reply
Jimmy Vance
Jimmy Vance
HPE Pro

‎10-23-2014 05:52 AM

‎10-23-2014 05:52 AM

Re: there are no configurable physical drives attached to the current array controller

What is the product ID (part number) of the server you ordered. If the server is an entry level model it has an embedded B140i which only supports SATA drives.




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.