HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

turn off usb boot device on ML350 G5?

Occasional Visitor

turn off usb boot device on ML350 G5?

how can I turn off the usb boot device on the ml350 G5, operating system win server standard 2008. I have an external Drive and usb dongle attached and everytime I have to reboot the server it doesn't boot from harddisk. I changed the boot sequence and put the usb boot device behind the Rom, harddisk, and floppy but still the usb device boots first.
Can I turn off the usb boot device?
Is there any other possibility or solution?
Gary Benavides Meza
Trusted Contributor

Re: turn off usb boot device on ML350 G5?

- Press F9 Key when prompted for Rom-Based Setup Utility.
- Go to System Options
- Select USB Control
- Select Legacy USB and disable it

When Legacy USB Disabled is selected, all USB ports are enabled under a USB-aware Operating System, but USB is not supported during POST, but Legacy USB disabled also disables iLO 2 virtual devices

Refer to HP RBSU User Guide Page 14: