ProLiant Servers (ML,DL,SL)

unknown connector and loop

New Member

unknown connector and loop

HP SAS Controller Smart Array P440/2GB FBWC/12G/int. Single mini-SAS port /PCIe3.0 X8/incl. h/h & f/h. Brckts (820834-B21)  we put this controller in the server server server HPE ProLiant ML30 Gen9 1xe3-1220v5 1x8Gb x4 2x1tb 3.5 " SATA RW B140i 1G 2P 1x350W 3-1-1 GO (831068-425)


on the website in the controller documentation

there is a link to the cable, it is non-working:

HPE Cable Options for a list of SAS cables for this controller, please refer to the HPE Smart Storage Cables compatibility matrix.
What kind of ribbon cable to connect the basket if no one knows and connector full wide on the controller


Re: unknown connector and loop


Cable kit(792356-001) should have the requried cables to connect to x4 drive backplane or to connect to x8 drive backpane

x4 2x1tb 3.5 " SATA RW B140i , or

X8 drive backplane.

From the server quickspecs:

HPE Storage Controllers SAS Controllers HPE Smart Array P440/2GB FBWC 12Gb 1-port Int SAS Controller 820834-B21 NOTE: Device Count - This controller can support up to 8 internal SAS/SATA devices Must select P440/P840 Cable Kit x1




While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

>Accept or Kudo