HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

upgrade memory for server dl380gl 380 g7


upgrade memory for server dl380gl 380 g7

Hello. I have two servers hp380g7 E5620-s\n:CZ2048JML6,

CZ2048JMLR. When plates move the memory from 1 to 2 to increase the server, the server will not start



P.S. this thread has been moved from ProLiant Servers - Netservers to ProLiant Servers (ML,DL,SL) - HP Fourms Moderator

Honored Contributor

Re: upgrade memory for server dl380gl 380 g7

So, you are moving memory from one server to another and the system with the newly installed memory is not booting?



 - Are all of the memory DIMMs the same (non-HP memory can be problematic)?

 - Check the slots that the new memory is installed in.  This order depends on if you have one or two CPU's.  See the below diagram.  This shows an example of several 4GB DIMMs installed, but you can use it a reference.  Install A first, B second, C third, and so on.   If you have two CPU's, alternate between CPU's (1st DIMM - CPU 1, A; 2nd DIMM - CPU 2, A, etc).





Was this helpful? Like this post by giving me a thumbs up below!

Re: upgrade memory for server dl380gl 380 g7



In addition to Robert's comments, refer the DDR3 memory population guidelines from DL380 G7 QuickSpec document:



Murali Mohan

Was this post useful? - You may click the KUDOS! thumb below to say thank you...