HPE Community
ProLiant Servers (ML,DL,SL)
1753505 Members
5551 Online
108794 Solutions
New Discussion

what to document for upgrade to 2000

 
Bill Yakabachi
Occasional Contributor

‎12-19-2002 05:31 PM

‎12-19-2002 05:31 PM

what to document for upgrade to 2000

Does anyone have any information regarding what to document on a compaq proliant servers. There is so much that i can think of to document but not sure if it would be useful info to use as reference. we have roughly 75 servers to upgrade. we are planning to upgrade from nt 4.0 thanks.
0 Kudos
Reply
1 REPLY 1
Janine Bertolo
Honored Contributor

‎12-20-2002 05:50 AM

‎12-20-2002 05:50 AM

Re: what to document for upgrade to 2000

Hi Bill;

From a hardware standpoint, the most useful information to document is the system serial number, the ROM version and date, the version of firmware on any array controller in the system, the version of the System Configuration Utility if the server has one, and the version of drivers you are using in the Operating System environment.

These are the components we look at when troubleshooting servers or making configuration suggestions.

Hope that helps,

Janine
To get results you've never had before, try something you've never tried before.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.