HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

what to document for upgrade to 2000

 
Bill Yakabachi
Occasional Contributor

what to document for upgrade to 2000

Does anyone have any information regarding what to document on a compaq proliant servers. There is so much that i can think of to document but not sure if it would be useful info to use as reference. we have roughly 75 servers to upgrade. we are planning to upgrade from nt 4.0 thanks.
1 REPLY
Janine Bertolo
Honored Contributor

Re: what to document for upgrade to 2000

Hi Bill;

From a hardware standpoint, the most useful information to document is the system serial number, the ROM version and date, the version of firmware on any array controller in the system, the version of the System Configuration Utility if the server has one, and the version of drivers you are using in the Operating System environment.

These are the components we look at when troubleshooting servers or making configuration suggestions.

Hope that helps,

Janine
To get results you've never had before, try something you've never tried before.