windows 2003, Eva3000 and cluster

[David_550]

Hi,
Please, somebody can helpme with information about cluster configuration in windows 2003 server and problem resolution.

I have two rx5670 with windows 2003 Enterprise 64bits server and eva 3000, i need configure cluster but when the luns are present to the two rx5670 the disk label is lost and present following:

Reservation of cluster disk 'Disk Q:' has been lost. Please check your system and disk configuration.

I attach a system log from the eventview.
Thanks

[Michael Schulte zur Sur]

Hi,

read this, if it gives you any clue:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;259237
Is your combination certfied by MS?
http://support.microsoft.com/?id=309395
configuration guide:
http://www.microsoft.com/technet/treeview/default.asp?url=/technet/prodtechnol/windowsserver2003/deploy/confeat/confclus.asp

hope, something is helpfull,

Michael

[kris rombauts]

Hello David,

(I found your eventlog in the other post you placed)

From the messages in the Event log i think those EVA3000 LUN's are seen twice (or more) by those hosts.

This probably means you don't have Securepath installed, is this the case ?
Secure path is a redundant I/O path failover/management s/w that is required in order to avoid the hosts from seeing multiple paths to the same LUN.

SecurePath s/w also exists for 64 bit Windows 2003 on IPF systems.

regards, Kris