ProLiant Servers - Netservers

Array stuck in "Interim Recovery" mode

 
Carl Rimmel
New Member

Array stuck in "Interim Recovery" mode

We had a DL 380 G2 fail and moved one of the mirror drives to an older DL 580. Upon initial boot, we chose to place the boot array in "interim recovery" mode. The server is up and running but we are unable to get the array out of interim recovery mode. Running the array config utility, we are told that we cannot make any changes to the array until the missing drive has been replaced. It is asking for a drive in Port 2 ID 0 of the integrated smart array controller. We are unable to do that. Is there any way to get the array out of interim recovery mode short of deleting the array completely?
1 REPLY 1
Oleg Koroz
Honored Contributor

Re: Array stuck in "Interim Recovery" mode

Only three options:
1. Disable Logical Drive
2. Defeat beast and add drive for recovery
3. Backup data and Rebuild array X