ProLiant Servers - Netservers

BL 460c boot from SAN

New Member

BL 460c boot from SAN

i'm new to this forum, and i'm having a little problem with booting to an EMC SAN with an emulex hba.

i'm able to configure both HBA's and see the LUN and install to that device (16gb). when i reboot the blade after the installation, the bios get enabled and see the lun, but i get the following message:

attempting boot from hard drive (c:)

i have disable the embedded raid controller.
i cannot find the option in the system bios to tell the blade that it's going to be a linux server. it's not in the system options anymore.
i know that i'm missing something easy, i'm just hoping someone can point me in the right direction.

thanks for everyone's help in advance