ProLiant Servers - Netservers

Boot issue with Proliant Microserver GEN10

 
marcelN1
Occasional Visitor

Boot issue with Proliant Microserver GEN10

Hi there,

I just have my new Proliant Microserver GEN 10 and installed 4 HDD WD Red NAS WD40EFRX. Then i installed Proxmox via the USB. There I selected ZFS RAID10 is file system. It all installed and restarted. After that nothing really happens. It just does not boot from HDD. Ultimatly I get a screen with Shell> . I restarted the system again, and in the BIOS (F11) under boot I see that I cannot select a boot option with HDD. Only have the following options:

  • UEFI: IPv4 P1 HP Ethernet 1Gb 2-port 332i Adapter - NIC
  • UEFI: IPv4 P2 HP Ethernet 1Gb 2-port 332i Adapter - NIC
  • UEFI: IPv6 P1 HP Ethernet 1Gb 2-port 332i Adapter - NIC
  • UEFI: IPv6 P2 HP Ethernet 1Gb 2-port 332i Adapter - NIC
  • UEFI: Built-in EFI Shell
  • Disabled

In the BIOS I do see under SATA configuration for PORT 1-4 an entry with WDC WD40EFRX-6. So how come that it does not boot via the HDD?

Marcel