Hello, my ProLiant MicroServer Gen8 won't boot anymore after I switched it of for a couple of days. Now it shows during boot:
>>iLO 4 has detected a self-test error. For details, consult the iLO 4 Server and iLO4 Diagnostics page. 1502: iLO 4 is disabled. Use the Security Override Switch and iLO 4 F9 ROM-Based Setup Utility to enable iLO functionality.<< (iLO was deactivated already before) >>HP Dynamic Smart Array B120i RAID Controller (v3.54.0, 0MB) 0 Logical Volume 1785-Drive Array Not Configured Run Array Configuration Utility Press <F5> to configure .... Boot Logical Drive is configured but is Missing or Offline<< (Array was configured, I tried to reset it but not working)
Entering Intelligent Provisioning (F10) is not possible, it shows a prompt for a view seconds and then try to boot from NIC.
Hello Ihaqueit, thank you for your Answer! I disconnected 1 Dimm and Drives (Also SAS plug - so just 1 Dimm, Keyboard, VGA and Network connected) but it still shows ilo error and Intelligent Provisioning just shows a promt for a short time. Anything elese I could check?
The following NEW package is going to be installed: hponcfg
1 new package to install. Overall download size: 59.0 KiB. Already cached: 0 B. After the operation, additional 174.0 KiB will be used. Continue? [y/n/v/...? shows all options] (y): Retrieving package hponcfg-5.6.0-0.x86_64 (1/1), 59.0 KiB (174.0 KiB unpacked) hponcfg-5.6.0-0.x86_641.rpm: Header V3 RSA/SHA256 Signature, key ID 26c2b797: NOKEY V3 RSA/SHA256 Signature, key ID 26c2b797: NOKEY
Looking for gpg key ID 26C2B797 in cache /var/cache/zypp/pubkeys. Repository Plain RPM files cache does not define additional 'gpgkey=' URLs. hponcfg-5.6.0-0.x86_64 (Plain RPM files cache): Signature verification failed [4-Signatures public key is not available] Abort, retry, ignore? [a/r/i] (a): i
sudo ./hponcfg-5.6.0-0.x86_64.compsig -l Force_Format.xml ./hponcfg-5.6.0-0.x86_64.compsig: line 1: /Begin: No such file or directory ./hponcfg-5.6.0-0.x86_64.compsig: line 2: Fingerprint: command not found ./hponcfg-5.6.0-0.x86_64.compsig: line 3: Key:: command not found ./hponcfg-5.6.0-0.x86_64.compsig: line 4: Hash:: command not found ./hponcfg-5.6.0-0.x86_64.compsig: line 5: Signature:: command not found ./hponcfg-5.6.0-0.x86_64.compsig: line 6: Fingerprint: command not found ./hponcfg-5.6.0-0.x86_64.compsig: line 7: /End: No such file or directory ./hponcfg-5.6.0-0.x86_64.compsig: line 8: $'HPIMAGE\001\001ݷ\250\347\300\246V@\261J\227\274B=\334{@\377\377\377\3777wpD\020\344\a': command not found ./hponcfg-5.6.0-0.x86_64.compsig: line 9: syntax error near unexpected token `(' ./hponcfg-5.6.0-0.x86_64.compsig: line 9: `5.6.0-0HPE Lights-Out Online Configuration Utility for Linux (AMD64...�� 3�qL��������' linux@localhost:/opt/hp/tools> sudo zypper install hash Loading repository data... Reading installed packages... 'hash' not found in package names. Trying capabilities. <font color="#AA0000">No provider of 'hash' found.</font> Resolving package dependencies... Nothing to do.
LASH_iLO4 v1.17 for Linux (Sep 30 2015) (C) Copyright 2002, 2015 Hewlett-Packard Enterprise Development Company, L.P. Firmware image: ilo4_278.bin Current iLO 4 firmware version 2.50; Serial number ILOCZ144200G3
Component XML file: CP046465.xml CP046465.xml reports firmware version 2.78 This operation will update the firmware on the iLO 4 in this server with version 2.78. Continue (y/N)?y Current firmware is 2.50 (Sep 23 2016 00:00:00) Firmware image is 0x1001b1c(16784156) bytes Committing to flash part... ******** DO NOT INTERRUPT! ******** Flashing is underway... 100 percent programmed. \ Succeeded. ***** iLO 4 reboot in progress (may take more than 60 seconds.) ***** Please ignore console messages, if any. iLO 4 reboot completed.
I rebooted and tried to enter Intelligent Provisioning by pressing F10 but still nothing happens, just showing a promt. Also entering raid configuration (F5) is not possible. During boot it displays the same iLO self test error as before.
it just shows a promt when i try to enter Intelligent Provisioning (black screen and promt in the upper left corner). Entering raid config is not possible, it just continues booting. Ilo error message like in my first post
Please update the BIOS. Once done then please check if you are still getting the issue. If the issue is still seen then please contact HPE Technical Support for any additional information or troubleshooting this issue.
