HPE Community
ProLiant Servers - Netservers
1753789 Members
7392 Online
108799 Solutions
New Discussion

Booting from SD card while USB stick plugin in microserver gen8

 
Nuland
Occasional Contributor

‎08-28-2017 06:20 AM

‎08-28-2017 06:20 AM

Booting from SD card while USB stick plugin in microserver gen8

Hi,

The server is microserver gen8.

I have system installed in SD card, that is booting fine.

After the booting, I have plugin one USB stick for system swap, which is also working fine.

The problem is happened while rebooting. Microserver boots but said the USB stick has no system then stop there.

I dont see option in BIOS to change the SD card higher priority than USB stick. 

 

Any suggestion that I could boot from SD card while the USB stick plugin?

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎08-28-2017 08:01 AM

‎08-28-2017 08:01 AM

Re: Booting from SD card while USB stick plugin in microserver gen8

Check if you have this option in RBSU:

RBSU-USB.jpg


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.