ProLiant Servers - Netservers
1748198 Members
2576 Online
108759 Solutions
New Discussion юеВ

Re: C-GbE2 - Firmware/Boot Image

 
Lee Drewell
New Member

C-GbE2 - Firmware/Boot Image

Hi Guys,

I am new to these side of the network so please excuse my ignorance. I need to enable RSTP on the interconnects and need to upgrade to FW/Bootimage 2.0.0.

I have got the following files - pGbE2_200.bin and pGbE2_b_200.bin.

The interface says that I need to ensure that I have the same firmware version as the bootimage that I am upgrading to. I have managed to upload pGbE2_200.bin to image2 slot, and I assume that I just change the "next boot" to reference that image2.

How and what do I have to do to get the bootimage up there and loaded?

Regards

Lee
2 REPLIES 2
Ole Thomsen
Frequent Advisor

Re: C-GbE2 - Firmware/Boot Image

You can use the management utility.

http://h18023.www1.hp.com/support/files/server/us/download/26670.html

It includes discovery andd TFTP upload facilities.

Ole Thomsen
Lee Drewell
New Member

Re: C-GbE2 - Firmware/Boot Image

Hi,

thanks for the reply. I have the utility already, it was more the question around the proceedure.

I dont understand the order of events..

I thought by placing the software boot image into "image2" and then referencing that in the "next boot".

But then how does the "firware" get updated?

I can obviously upload the firmware file into the other image "image1", but what do I have to do to get the switch to update to that version?

Regards

Lee