ProLiant Servers - Netservers

Compaq Proliant DL380, NO VIDEO

 
Ryan A. Hunter
New Member

Compaq Proliant DL380, NO VIDEO

I have a compaq dl380, running twin 650 PIII, and 4 X 128 133mhz ram. Everything powers on, hard drives spin up, no video, tried external video card, no video, tried different ram, tried different processors, nothing, all the same, NO VIDEO. If any one has any idea on the motherboard settings or etc. Or if you think you can help solve this solution please post....
2 REPLIES 2
Ryan A. Hunter
New Member

Re: Compaq Proliant DL380, NO VIDEO

Just for further clarification....

THis is a Compaq Proliant DL380 G1 dual slot 1 PIII server. I have listed parts below:
2 Matched pIII 650mhz procs
2 matched VRM's rev. 3
4 X 128mb pc133 sdram Micron
2 9.1 Wide-Ultra SCSI 2 10000 RPM HD
1 9.3 IBM SCSI 2 drive
2 Hot swap redundant power supplies.

I have ram and processors at my disposal, just no 133 fSB procs. You would think that this thing is backwards compatable, ????????????

I get no video.

HELP.
Oleg Koroz
Honored Contributor

Re: Compaq Proliant DL380, NO VIDEO

http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?locale=en_US&prodTypeId=15351&prodSeriesId=254889〈=en&cc=us

You can do is Bring System To minimum, with Original Memory and Single CPU/VRM, Try by Swap around, all Detailed Info you can Find under Manual, and Single memory should Cover. From PDF File see all Jumpers.