ProLiant Servers - Netservers

Configuring MegaRAID IDE Utility on Proliant ML310

 
Ade Onanuga
New Member

Configuring MegaRAID IDE Utility on Proliant ML310

This server is running MS 2000 SBS. After replacing a dead HDD, RAID1 shows "Online" status, but windows cannot access the disks. Deleting and reconfiguring RAID Array on MegaRAID utility did not help. Also, I tried booting from windows installation diskettes, once again no disks were found by windows.
Can anyone please point me to any available docs on this utility or guide me as to properly setting up the RAID such that windows can access the disks?
1 REPLY 1
Ade Onanuga
New Member

Re: Configuring MegaRAID IDE Utility on Proliant ML310

I tried booting from the SmartStart 6.30 CD but the machine will not boot from CD, Even though the CD is 1st on the boot order list. However, it would boot from a Floppy.
Any help would be greatly appreciated.