Correct SCSI driver for ML330 Server Feature board??

[CA1155689]

I need the correct driver for the SCSI controller on the original ML330 server feature board. It's a card that has video, ethernet and Scsi-2 LVD built in and it plugs into the motherboard. I've tried several drivers from the HP site but I keep getting the "No drives found" error when I try to install Windows 2000 server. I use the third party driver option at the beginning of the Win2K server load to load what I think is the correct scsi driver but no luck so far.

Both Smartstart 5.5 and MS-DOS can access the drive and partition/format it, but Windows 2000 WILL NOT LOAD! I'm going bats...

Help would be appreciated.

Thanks,

Wallace Poole

[CA760212]

Is technically the "CPQ 64bit66MHz feature board"

Any Adaptec U160 (like the 29160) driver will work.

The official one for Windows 2000 is here.\

http://h18023.www1.hp.com/support/files/server/us/download/18604.html

[Oleg Koroz]

I'm assuming (by SCSI-2) - you nave G1 server

http://h18023.www1.hp.com/support/files/server/us/locate/20_1118.html

Driver
http://h18023.www1.hp.com/support/files/server/us/download/17320.html

http://partsurfer.hp.com/cgi-bin/spi/showphoto?partnumber=176608-001

You need to Install F10 System Configuration Utility firstly from smart start 5.5 than do Direct Install W2K comes with Driver