ProLiant Servers - Netservers

DL 100 Storage Server + KVM Switch

 
BR888961
New Member

DL 100 Storage Server + KVM Switch

Hi,
I have prolbems with a DL 100 Storage Server on a KVM Switch. When i plug on the server - neither the keyboard nore the mouse is working - when i plug in a keyboard an mouse directly (not over kvm switch) its all working fine. The strange thing is - i have exactly the same configuration by another customer and this works fine without problems - i installed on both storage servers the actual release (5.5) - may this a setting in the bios on the server where the keyboard etc. over kvm is not working ? - any ideas ?
best regards manuel
2 REPLIES 2
Oleg Koroz
Honored Contributor

Re: DL 100 Storage Server + KVM Switch

Is there other cables/ports that you can try? Is only one server with that problem?
What type of KVM? Is there Firmware available for it?

http://h18023.www1.hp.com/support/files/server/us/locOsCat/20_81.html
BR888961
New Member

Re: DL 100 Storage Server + KVM Switch

Hi,
Its a Secom Value 19" KVM Switch with TFT Display. Every other server on this kvm is working fine (at the moment 4 other servers). it doesnt matter on witch port of the kvm switch i plug on the dl 100 storage server i cant get to work this config. i have tryed the server on every avaliable kvm port. unfortunately it seems that there is no firmware for the kvm switch.

greetings
manuel