DL 380 G3

 
John Schiller
New Member

DL 380 G3

This server will not boot up from CD I have replaced Cd rom Module and it still does not start with the SBS 2003 disk1

2 REPLIES 2
Diogo_Conrado
Frequent Advisor

Re: DL 380 G3

Do you have a SmartStart CD?

Look for it on www.hp.com...

Normally, it´s solve this issue..
Kedd Guyton
Respected Contributor

Re: DL 380 G3

Assuming that you have the boot order set properly and a known working bootable CD, you should consider replacing the system board.

Before that you could attempt to clear NVRAM from the RBSU (ROM-Based Setup Utility). Enter the RBSU by pressing the F9 key following POST.