DL 580 Slot 0 Array Controller Failure

[Terence Leung]

I upgrade the HP Firmware Maintenance CD V 7.4 with ROM Update Utility on Server DL 580- Integrated Smart Array Controller from 1.45 to 1.50 B. upgrade was Success on the screen. but error come out after reboot:

""Integrated Smart ??? Array Controller
Slot 0 Array Controller Failure
Board ID not programmed, replace ROMS or Replace controller.""

anyone know how to fix it? or must hardware replace?

[Oleg Koroz]

Reset ROC chip
http://partsurfer.hp.com/cgi-bin/spi/showphoto?partnumber=158855-001

and than try to run Diskette #1 from kit
http://h18023.www1.hp.com/support/files/server/us/download/14694.html
SP19677.exe


Clear NVRAM might be needed
after restore System Partition access

http://h18023.www1.hp.com/support/files/server/us/download/13227.html
SP19619.exe

[Terence Leung]

how to Reset ROC chip? I took off the battery from the array. and put the SP19677.exe disk in, they said no device find can be reprogramme