ProLiant Servers - Netservers
cancel
Showing results for 
Search instead for 
Did you mean: 

DL185 G5 how to monitor Smart Array P400

 
dejanosi
Occasional Contributor

DL185 G5 how to monitor Smart Array P400

I haw a brand new DL185 G5 server with Smart Array P400.

Now I would like to get e-mail notification when something goes wrong with raid. Failed drive, lost redundancy..

Normal this job goes to "HP Management Agents Event Notifier" part of "HP Insight Management Agents" or to "HP Storage Manager" software.

"HP Storage Manager" is not available for Smart Array P400.

"HP Insight Management Agents" failed to install on DL185 G5.

----
The software is not supported for installation on this system.
The installation program couldn't find the appropriate system management controller driver which is required but is not currently installed. Please install the appropriate system management controller driver and then rerun the setup program.
----

No Agents no Agents Event Notifier.

And on board Lights-Out 100 card does not support any information about status of raid.

Anybody have any idea which software from HP to use to get e-mail notification for Smart Array P400 if something go wrong with RAID on DL185 G5.

Dejan
1 REPLY 1
Prem Selvam Arumugam
Trusted Contributor

Re: DL185 G5 how to monitor Smart Array P400

HP ProLiant Array Diagnostics Utility for Windows & HP ProLiant Array Configuration Utility for Windows will do the job

Follow the link

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3579901〈=en&cc=us&taskId=135&prodTypeId=15351&prodSeriesId=3579900

Select the OS

Find it listed under Software - System Management.