DL360 G4 Post 207 msg

[CA1104891]

I Installed a second 1gb memory module and now I receive the POST 207 msg stating: Invalid memory configuration. Single channel memory mode supports a single Dimm installed in Dimm socket 1. Please remove all other Dimms or or install in pairs.

I do have banks 1 and 2 filled with the the same hp memory Part #331562-051. The action listed is to install the memory in pairs and change the memory mode.

I can not find where to change the memory mode. Does anyone know how to do this?

[CA3355]

Hi,
Just curious if you resolved this error? I just received some new DL360 G4 boxes with additional 1G memory and I am getting the same error.
Thanks,
Tony

[CA1104891]

Tony,

I have found that the physical characteristics of the memory must be the same. Either be 64k, 128k, 256k, 512k, chips are fine but the PHYSICAL make-up of the chips must match.

Just a note. The memory I purchased did have the correct HP part number on it but it still did not match what was installed in the system.

This fixed my problem.

[Oleg Koroz]

Here is related use for Troubleshooting

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=PSD_EL041021_CW02

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=PSD_EH000307_CW01

Where you purchased memory? HP direct or sub resellers?

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=PSD_CN0112W

[CA3355]

Thanks Robert. I'm just trying to get HP to ship me the correct modules. They just sent SAMSUNG chips this time around and bye box comes shipped with Infineon!.
Tony