ProLiant Servers - Netservers

DL360 G4 Post 207 msg

 
CA1104891
Occasional Contributor

DL360 G4 Post 207 msg

I Installed a second 1gb memory module and now I receive the POST 207 msg stating: Invalid memory configuration. Single channel memory mode supports a single Dimm installed in Dimm socket 1. Please remove all other Dimms or or install in pairs.

I do have banks 1 and 2 filled with the the same hp memory Part #331562-051. The action listed is to install the memory in pairs and change the memory mode.

I can not find where to change the memory mode. Does anyone know how to do this?
4 REPLIES 4
CA3355
New Member

Re: DL360 G4 Post 207 msg

Hi,
Just curious if you resolved this error? I just received some new DL360 G4 boxes with additional 1G memory and I am getting the same error.
Thanks,
Tony
CA1104891
Occasional Contributor

Re: DL360 G4 Post 207 msg

Tony,

I have found that the physical characteristics of the memory must be the same. Either be 64k, 128k, 256k, 512k, chips are fine but the PHYSICAL make-up of the chips must match.

Just a note. The memory I purchased did have the correct HP part number on it but it still did not match what was installed in the system.

This fixed my problem.
Oleg Koroz
Honored Contributor
CA3355
New Member

Re: DL360 G4 Post 207 msg

Thanks Robert. I'm just trying to get HP to ship me the correct modules. They just sent SAMSUNG chips this time around and bye box comes shipped with Infineon!.
Tony