ProLiant Servers - Netservers

DL360G5 with P410 which cable f/onboard?

 
mastsrl
Frequent Advisor

DL360G5 with P410 which cable f/onboard?

Hello,
what SAS cable do i need to order to install a SA P410 to replace the onboard E200i controller?
the DL360 QS page does not list the necessary cables and and new P4x0 controllers use the mini-sas connector now.

and yes, i know i can put a P400i but i need a P410.
11 REPLIES 11
Prem Selvam Arumugam
Trusted Contributor

Re: DL360G5 with P410 which cable f/onboard?

Check page11 from below document and order the one you need.

http://h18004.www1.hp.com/products/quickspecs/13201_div/13201_div.pdf
Sylvain Gelinas 2
Frequent Advisor

Re: DL360G5 with P410 which cable f/onboard?

Sas to Mini Sas Cables
Mini-SAS to Mini-SAS 12.75" & 18.00" 496029-B21
Mini-SAS to Mini-SAS 25.50" & 28.00" 496013-B21
Mini-SAS to Mini-SAS 33.00" 496014-B21
Mini-SAS to SFF8484 18.00" 496015-B21
Mini-SAS to SFF8484 24.00" 496015-B21
Mini-SAS to SFF8484 32.00" 496016-B21
Mini-SAS to SFF8484 35.00" 496016-B21
QuickSpecs HP Smart Array P410 Controller
Related Options
mastsrl
Frequent Advisor

Re: DL360G5 with P410 which cable f/onboard?

i've already seen the quickspec page of the P410, which one of those is the one i need?

i've noticed from the self repair images that it's the same cable that the e200i/p400i controllers use(backplane connector which i don't know what is to mini-sas), only longer.

From the instructions for the P600 on this server which requires the "SAS 4i to mini-sas4i" i'm assuming the backplane is mini-sas then(as the SAS 4i must be SFF-8484).

then my guess is the 496013-B21 but why does it has 2 listed lengths(it is a pair of cables for both ports?)?

what's worse, googling that SP yields a 24" battery cable...
Sylvain Gelinas 2
Frequent Advisor

Re: DL360G5 with P410 which cable f/onboard?

Maybe this one ?

408763-001 DL36X Mini Serial Attached SCSI (SAS) cable - Used to connect Smart Array P400i to DL36X fifth and sixth drive bays - 0.35m (13.4 in) long, four lanes


Check with partsufer.hp.com and the exact model you have.
mastsrl
Frequent Advisor

Re: DL360G5 with P410 which cable f/onboard?

not long enough, you can see it in the interactive pictures of the server, it's made for the 2nd port of the P400i which is much closer than a PCI card ports will be. It needs to be at least 60cm

which brings me back to my original problem, what is the longer cable with those 2 connectors?
Sylvain Gelinas 2
Frequent Advisor

Re: DL360G5 with P410 which cable f/onboard?

This one ?

HP SAS 4i to Mini SAS 4i 31 inch/.79 meter cable
NOTE: Used to connect SA-P600, SA-P400, SA-E200 Controllers to the HP ProLiant DL365 G5 drive backplane. This kit supports all six drive bays. 411100-B21
Sylvain Gelinas 2
Frequent Advisor

Re: DL360G5 with P410 which cable f/onboard?

Note that the dl360 does not seem to be supported with the P410

Q2. Which ProLiant servers are supported by the Smart Array P410?
A2. The Smart Array P410 is supported on most current generation ProLiant 300 and 500 series servers. View a complete, up-to-date list of supported servers.

ftp://ftp.compaq.com/pub/products/servers/proliantstorage/arraycontrollers/compatability-matrix.pdf
mastsrl
Frequent Advisor

Re: DL360G5 with P410 which cable f/onboard?

that's not a problem because the DL360 G5 IS a current generation product.
Besides, it's like any other SA PCIe controller, they're all compatible in whatever server you plug it, regardless of what the matrix says.
Sylvain Gelinas 2
Frequent Advisor

Re: DL360G5 with P410 which cable f/onboard?

In the quickspec of the Dl365, this cable seems to be the one you need : 411100-B21

http://h18000.www1.hp.com/products/quickspecs/12799_div/12799_div.HTML