ProLiant Servers - Netservers

DL380 G3 Replacing bad hot swap scsi drive with RAID5

 
Elena Rogge
New Member

DL380 G3 Replacing bad hot swap scsi drive with RAID5

I have to replace a bad hot swap scsi drive wchich is a part of RAID 5.

Can I do it without rebooting? Must I do anything else (rebuilding RAId 5 or something else)
1 REPLY 1
Iain McCracken
Frequent Advisor

Re: DL380 G3 Replacing bad hot swap scsi drive with RAID5

You dont have to do anything apart from hot plug the drive So pull the drive out with the server up and plug in replacment drive
The smart controler will rebuild the drive automaticly You can monitor this if you have loaded the HP tools and go to the ACU (array configuration utility)