DL380 Remote Insight Board

[David Darmanin]

Our DL380 has the integrated lights out edition board and we have forgotten the password. I dont think we every changed it from the one it came from the factory with.

Does anyone know how to reset it.
Ive tried doing it on the motherboard switch but that only does the BIOS password not the RILOE

Thanks
David.

[Doug Hudson]

What model of DL380 do you have? There is a jumper setting on the motherboard to disable the password lock, allowing you to access the RBSU without being prompted, but I believe it varies by model.

[David Darmanin]

Its an original "g1". I found the password switch for the BIOS password but not the RILOE?

Any ideas where it might be on the motherboard. I couldnt find it.

[Doug Hudson]

I apologize, I should have asked for more information. Is this an original RILO card, or a RILO II. I have a RILO II on my desk next to me, and there is a set of four DIP switches on the card itself which will allow a reset. I am currently looking through documentation to see if I can provide an answer as to which switch is correct.

[El.Magnifico]

If you set the security switch on the mainboard you have access to the iLO RBSU.
There you can create or change users, you also can change the users passwords.
The password for iLO RBSU and remote access over LAN/Browser are the same.

Procedure at RiLOE II is the same.

HTH

Michael