ProLiant Servers - Netservers

Errors on a ML370 G4

 
SOLVED
Go to solution
Technical Datamerge
Occasional Contributor

Errors on a ML370 G4

Event Type: Warning
Event Source: Storage Agents
Event Category: SCSI
Event ID: 1283
Date: 16/02/2006
Time: 9:57:52 AM
User: N/A
Computer: AMAZON2
Description:
Component: SCSI Agent Error: Could not read the registry subkey: "CompaqStorage\SCSI\Controller". Cause: This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error.
Data:
0000: 02 00 00 00 ....

Now before I reboot the server because I don't believe this will fix the problem as they only started appearing after windows updates and I accessed the ACU utility on the server yesterday. Anyone have any ideas?
2 REPLIES 2
Tarek Kawach
Honored Contributor
Solution

Re: Errors on a ML370 G4

Hi:

If reboot did not fix your issue; then I would sugest running the HP Proliant support paq. 7.40 (PSP) this will reinstall all the HP drivers for the emedded storage controller and the raid controller,

possible windows updates reinstalled one of these drivers.

where is the storage device connected to ; the scsi onboard controller or different card. and is the tape drive working. etc.

ProLiant Support Pack for Microsoft Windows Server 2003 version 7.40 B (4 Jan 06)http://h18000.www1.hp.com/support/files/server/us/download/23837.html

best regards,

Tarek.
Hey, look a light at the end of the tunnel.
Technical Datamerge
Occasional Contributor

Re: Errors on a ML370 G4

Thanks for your help there Tarek much appreciated