Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
cancel
Showing results for 
Search instead for 
Did you mean: 

Fan

Highlighted
andreabertoni
Occasional Contributor

Fan

Hello, after installing Centos 7.3 on my hp Proliant Microserver Gen 8, the fan speed remains constant at 70% despite the server not working; And this fact seems to me a little abnormal.

It is my fault that the high speed of the fan is cumbersome in the temperature of the discs (5 discs one of which places the cd player) and ILO is 50 ° despite the discs not working; My question that I want to ask and the one to know if it is possible to install drivers or set some parameters so that the temperature is correctly detected to decrease the fan speed; Or some setting to make it go more slowly.

Kind regards Andrea Bertoni

1 REPLY
Jimmy Vance
HPE Pro

Re: Fan

You need to make sure you are running System ROM firmware version 06.06.2014 or newer.  The newer firmware will run the fans much slower. Search the forum for Microserver Gen8 Fan Noise, you will find very detailed threads on the topic




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!