ProLiant Servers - Netservers

Fankit on maximum after installation Windows 2008 Standard on DL380 G4

 
CA1372971
Occasional Contributor

Fankit on maximum after installation Windows 2008 Standard on DL380 G4

Dear all

After installing Windows 2008 on the DL380 G4 the fankit is running on maximum until I reboot. I don't know why because we have a moderat temperatur +/- 20 degrees and with 2003 standard we had this only on a heavy CPU load. The CPU load (we took away some vms) it's less than 5% and 1200 MB allocated (of 4096 MB). A installed Smartstart for x64 Windows 2003 (Version 7.91).

Any ideas ?
2 REPLIES 2
kris rombauts
Honored Contributor

Re: Fankit on maximum after installation Windows 2008 Standard on DL380 G4

this is typically the case when no insight management agents are loaded i.e. health driver. I guess for w2k8 they are still to be released.

HTH

Kris


CA1372971
Occasional Contributor

Re: Fankit on maximum after installation Windows 2008 Standard on DL380 G4

Hi Kris

I removed the Smartstart Insight Tools (all without Array Configuration) 7.91 and now there is so silent that I can sleep in my office :-)). It looks like this is the problem. So I have to wait for the 2K8 version. Strange is that the server is working fine a few days before it begins to do make this akustic terrorism ...

Thankx in advance
Matthias