Firmware for 73 Go SCSI hotplug hard drive

[blanchard jean]

Hello,
I have 2 smart predictive failure on two 73 Go hot pluggable U320 scsi hard drive. model number : BD08285A25 firmware HPB7. I don't finf the link to upgrade the firmware on HP site. Someone could help me please ?
Thanks.

[James ~ Happy Dude · Accepted solution]

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=uk&prodTypeId=329290&prodSeriesId=3302267&prodNameId=3403431&swEnvOID=54&swLang=13&mode=2&taskId=135&swItem=co-47757-1

:) Regards.

[James ~ Happy Dude]

I reckon, the model # is not the same; But its the Firmware you are looking for.

;) Regards.

[blanchard jean]

Thanks a lot Happy Dude for your answer but are you really really sure that it's the right firmware because in the release note I don't see my hard drive model number BD07285A25 ?

[blanchard jean]

Happy Dude,

I forget to tell you that my hard drive is not fibre channel technolgy but with hotplug SCA connector.

[James ~ Happy Dude]

Hello Blanchard,
Try the firmware, If its not meant for this HDD, It will report "No suitable Hardware found".

:) Regards.

[blanchard jean]

Thanks again Happy Dude for your answer !
Last question : Could you tell me exactly which software must I used to update the firmware of my hard drives ? Regards
Jean