ProLiant Servers - Netservers

Gen10 cannot startup after a BIOS update

 
Ralph627
Occasional Visitor

Gen10 cannot startup after a BIOS update

After following instructions from HPE web site, I did a BIOS update(BIOS A330 - ZA10A330) within Windows 7 system, i.e., executing that BIOS.bat, my Gen10 cannot start up at all now. I could not even see the BIOS startup screen. I tried removing CMOS battery and not working at all. It seems my Gen10 has become into a brick, sadlly :-(. What can I do?

3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: Gen10 cannot startup after a BIOS update

What server model?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
krasinka1409
Respected Contributor

Re: Gen10 cannot startup after a BIOS update

If your iLO is configured and running, you my log in and try to downgrade the BIOS to your previous verion. 

Thank you
I am an HPE Employee
Torsten.
Acclaimed Contributor

Re: Gen10 cannot startup after a BIOS update

Looks like the Microserver Gen10 - unfortunatelly no support for Windows 7 and no ILO at all.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!