ProLiant Servers - Netservers
1752810 Members
5843 Online
108789 Solutions
New Discussion

Re: HP Array Configuration Utility Software install fail on HP ProLiant MicroServer

 
ITGuysDublin
New Member

HP Array Configuration Utility Software install fail on HP ProLiant MicroServer

Hello,

 

we recently purchased a HP ProLiant MicroServer, running Windows Server 2012 Essentials. It has a

AMD 1X2 Mirror/RAID1 SCSI Disk Device (1000.00 GB)

 

Which software offered by HP will be the equivalent of Dell's Open Manage Server Administrator and can be used with Windows Server 2012 Essentials?

 

After inputting the server's System Serial Number in the HP website, I downloaded the suggested software and drivers, but they are giving an installation error.

 

Any suggestions?

 

 

P.S. this thread has been moved from Servers > General to ProLiant Servers - Netservers - Hp Forums Moderator

1 REPLY 1
Johan Guldmyr
Honored Contributor

Re: HP Array Configuration Utility Software install fail on HP ProLiant MicroServer

Hi, HP's ACU only works with an HP Smart Array card. If you don't have the hardware installed that the driver/software is for it's not so surprising if it fails. For some downloads it says what it's supported for in the description tab or the release note tab.

The HP downloads are here:
http://h20566.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?lang=en&cc=us&sp4ts.oid=4310887

Perhaps AMD has some software for this?