ProLiant Servers - Netservers

HP DL580 G4 Won't power on

 
James Lincoln
New Member

HP DL580 G4 Won't power on

I've installed 6 HP DL580 G4 servers in two different racks and two of them powered on okay and four of them will not power up. There is a flashing red lightning bolt on front of the servers. I've checked inside the servers and there appears to be nothing loose and all of the servers were unpacked and racked with no rough handling. What could be the problem?
2 REPLIES 2
Robert
Advisor

Re: HP DL580 G4 Won't power on

Download this pdf and do a pdf word search "insufficient"
http://w3.gre.ac.uk/ils/ict/sys/projects/TSCitrix/User%20Guide.pdf
Good Luck
Robert
Advisor

Re: HP DL580 G4 Won't power on

PS - Might be wise to do a phase detect on your AC - One time I found where power bars were used after a UPS, and the power bar manufacture had reversed ground and common. Might also meter the line for 117VAC just to make sure. This of course given that the working units are not powered by the same AC branch. With those checks satisfied, it would be odd that more than one unit suffers the same problem. Let me know what you found.