HPE Community
ProLiant Servers - Netservers
1752777 Members
6274 Online
108789 Solutions
New Discussion

HP GEN8 MICROSERVER Wont Boot

 
jackb2296
Occasional Visitor

‎07-09-2019 09:47 AM

‎07-09-2019 09:47 AM

HP GEN8 MICROSERVER Wont Boot

Hello,

Currently having an issue with HP Gen 8 Microserver.

I recently tried to upgrade the RAM from 12gb (1*4gb 1*8gb) to 16gb (2*8gb),  to do so i removed the 4gb RAM and installed a 8gb RAM, ever since doing so i am no longer able to boot, getting to 90% and just sticking with code 0114.

 I have since removed the new 8gb RAM and re installed the 4gb RAM and am now not getting past "Early system initialization, please wait ...  Progress 20% code 0114.

I have also tried reseting the NVRAM to no avail.

I am now stuck in a boot loop regardless of which stick i use or which slot.

Does anyone have any ideas?

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.