HP MICROSERVER GEN10 WONT BOOT UP

[Bulldozer]

Hi all! I need some help with my Proliant Microserver Gen10. I cant see any drives in the BIOS Setup in the boot order option when UEFI mode. I can see the sata devices in the SATA Configuration but all of them grayed out. If I switch to legacy mode and reset, all of my sata drives showing up in boot order option, but wont boot up because the os is in a UEFI partition. I spent many hours trying to google what could be wrong, Secure boot is disabled, still no luck. Any help would be much appreciated, thanks very much in advance!

[Pra_Sah]

Hello Bulldozer ,

Thank you for sharing your concern.

Please log a support ticket with HPE Technical support, so that we can investigate this issue further.

Regards,

[JAdamski]

Does this thread have any solution for you!

https://community.hpe.com/t5/proliant-servers-netservers/microserver-gen10-hangs-on-boot/td-p/6987843