ProLiant Servers - Netservers

HP MICROSERVER GEN10 WONT BOOT UP

 
Bulldozer
Occasional Contributor

HP MICROSERVER GEN10 WONT BOOT UP

Hi all! I need some help with my Proliant Microserver Gen10. I cant see any drives in the BIOS Setup in the boot order option when UEFI mode. I can see the sata devices in the SATA Configuration but all of them grayed out. If I switch to legacy mode and reset, all of my sata drives showing up in boot order option, but wont boot up because the os is in a UEFI partition. I spent many hours trying to google what could be wrong, Secure boot is disabled, still no luck. Any help would be much appreciated, thanks very much in advance!

2 REPLIES 2
Pra_Sah
HPE Pro

Re: HP MICROSERVER GEN10 WONT BOOT UP

Hello Bulldozer ,

Thank you for sharing your concern.

Please log a support ticket with HPE Technical support, so that we can investigate this issue further.

Regards,

I am an HPE employee

Accept or Kudo

JAdamski
New Member

Re: HP MICROSERVER GEN10 WONT BOOT UP