HP MICROSERVER GEN8 Upgrade iLO?

[Szabi]

Can i upgrade iLo from 1.30 directly to the latest version, without breaking anything?

[sudhirsingh]

Hi,

Yes, you can.

Hope this helps!

Regards,

Sudhir

[Szabi]

I updated iLO to version 2.73 and now i get an error:

"Controller firmware revision 2.09.00 Embedded media manager encountered SL_AbortHandler during init"

iLO doesn't want to work normally, too much loading time, I can't do anything on it.

[Torsten. · Accepted solution]

Obviously now the ILO NAND issue is visible, see
https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00048622en_us

[randman]

My Microserver Gen8 is on iLO version 2.73. Works fine for me.

[sudhirsingh]

Hi @Szabi,

Sorry to hear that.

Seems like some issue with NAND,

as mentioned by  @Torsten. follow the resolution as per the following advisory.

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c04996097.

Hope it helps!

Regards,

Sudhir

[Pharkurnell]

How did you go with this ???
I stupidly upgraded Lights out card 4 firmware today and now have same error.

[Torsten.]

No, the issue was already there, but with current firmware you can see the issue.