ProLiant Servers - Netservers
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Microserver Gen8 lost letter volume after reboot OS (S2012R2)

itcollider
Occasional Contributor

HP Microserver Gen8 lost letter volume after reboot OS (S2012R2)

Hello!

I have the HP Microserver Gen8 with Dynamic Smart Array B120i. Installed HDD drives (4x2TB HP). Array has been configured (smart array administration) in scheme two mirror drive. 2 x 2TB (MBR).

conf1.png

In the first volume (Array A) installed OS Server 2012 R2.

after.png

Question. After rebooting the server is lost letter of the second volume. You can of Disk Manager to re-appoint him to any letter. But after rebooting the letter volume is lost again.

before2.png

What am I doing wrong?

Thank in advance!

 Best regards, Alex.

1 REPLY
itcollider
Occasional Contributor

Re: HP Microserver Gen8 lost letter volume after reboot OS (S2012R2)

The solution is simple. MBR can be only one out of all the connected logic volume. The second volume created GPT. All OK!