ProLiant Servers - Netservers
1748177 Members
4402 Online
108758 Solutions
New Discussion

HP Microserver N54 Driver Question

 
Motion2082
New Member

HP Microserver N54 Driver Question

Hey guys,

 

I have decided to install Windows 8 on my HP Microserver N54. 

 

The problem is all the drivers on HP website are designed for Windows Home Server.

 

Is there a work around this as Im only getting 10gb/sec network transfers atm :( :( :(

 

 

 


  P.S.This thread has been moved from ProLiant Servers (ML,DL,SL) to ProLiant Servers - Netservers-HP Forums Moderator

1 REPLY 1
Matti_Kurkela
Honored Contributor

Re: HP Microserver N54 Driver Question

According to page 90 of this document, all the current Proliant MicroServer models have a Broadcom BCM5723 gigabit Ethernet controller. Through http://www.hp.com/go/support I can find drivers only for Windows Server 2008, 2008 R2, 2008 Small Business, 2012 and 2012 Essentials, and for RedHat Linux 5 Server.

 

The Broadcom BCM5723 is a common server NIC chip, so the driver for it may be built-in to new operating systems.

But if you need one, you could try these drivers direct from Broadcom:

 

http://www.broadcom.com/support/ethernet_nic/netxtreme_server.php

 

For a regular 1 Gbit/s NIC it is impossible to get 10gb/s speeds, so I assume you've made a mistake somewhere.

If you have added an extra high-performance NIC to your Microserver, identifying the make and model of the NIC would be rather important in finding a driver for it...

MK