ProLiant Servers - Netservers
1745821 Members
4115 Online
108722 Solutions
New Discussion

Re: HP Netserver E 800 Beep Code

 
CA1248793
New Member

HP Netserver E 800 Beep Code

I have an E 800 with the following beep code

1 - 2 - 2 - 3

The website says that it need BIOS check sum. Can anyone enlighten me as to what is needed?
1 REPLY 1
amhakassa
Honored Contributor

Re: HP Netserver E 800 Beep Code

Hi Rich,

Are you getting any video eventhough you got that beep codes?

If so reflash the BIOS to the latest --If you have already the latest I would still recommend to reflash it because BIOS might be corrupted. You can download the latest BIOS from this link
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=20916&locale=en_US&taskId=135&prodSeriesId=45937&prodTypeId=15351&swEnvOID=54#326

Download the file and creat a bootable floppy off of it by double Clicking it then boot the server from the floppy and update the BIOS. You might need to press F2 on the next reboot after BIOS falsh and then press F10 in the BIO to save and exit

If this doesn't help, then disconnect everything from the server except the processor and boot the server
If you get a beep code that is good but if you don't then you might have to repalce the systemboard.

regards
Amha Kassa