HP P410 - Gen8 microserver linux HPSA driver fault

[cseb62]

Hi,

Sorry for my bad english.

I try to install HPSA drivers on linux 3.10.x.

The linux boot but no access to the sda.

the issue is in the unique_id of the disk :

cat /sys/class/scsi_disk/0\:0\:0\:0/device/unique_id
[35614.130111] BUG: unable to handle kernel paging request at 00000001000000df
[35614.163742] IP: [<ffffffff814ab928>] _raw_spin_lock_irqsave+0x8/0x30
[35614.194153] PGD 13e716067 PUD 0
[35614.209543] Oops: 0002 [#1] SMP
[35614.224975] Modules linked in: usbhid hid broadwell_synobios(PO) button ax88179_178a usbnet tg3 r8169 bnx2x(O) bnx2 vmxnet3 pcnet32 e1000 sfc netxen_nic qlge qlcnic qla3xxx pch_gbe ptp_pch sky2 skge jme ipg uio alx atl1c atl1e atl1 libphy mii libcrc32c r8168(O) ixgbe(O) igb(O) i2c_algo_bit e1000e(O) dca vfat fat mdio sg hpsa mpt3sas(O) mpt2sas(O) megaraid_sas ata_piix mptctl mptsas mptspi mptscsih mptbase scsi_transport_spi megaraid megaraid_mbox megaraid_mm vmw_pvscsi BusLogic usb_storage etxhci_hcd xhci_hcd uhci_hcd ohci_hcd ehci_pci ehci_hcd usbcore usb_common mv14xx(O) el000(O) [last unloaded: broadwell_synobios]
[35614.489206] CPU: 1 PID: 7957 Comm: cat Tainted: P           O 3.10.102 #15047
[35614.523515] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 11/02/2015
[35614.557308] task: ffff880141cc78d0 ti: ffff88013e2f8000 task.ti: ffff88013e2f8000
[35614.593158] RIP: 0010:[<ffffffff814ab928>]  [<ffffffff814ab928>] _raw_spin_lock_irqsave+0x8/0x30
[35614.635530] RSP: 0018:ffff88013e2fbe08  EFLAGS: 00010082
[35614.660938] RAX: 0000000000000282 RBX: ffff88013e967170 RCX: 00000000ffffffff
[35614.695448] RDX: 0000000000000100 RSI: ffffffffa0296ae0 RDI: 00000001000000df
[35614.729641] RBP: 00000001000000df R08: ffffea00045a7098 R09: 000000000003f095
[35614.763885] R10: 00000000000002b5 R11: 0000000000000246 R12: ffff88013e464a40
[35614.798030] R13: 0000000000001000 R14: ffff88013c38b438 R15: ffff88013e694000
[35614.832476] FS:  00007f132cdc6700(0000) GS:ffff880147a20000(0000) knlGS:0000000000000000
[35614.871102] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[35614.899213] CR2: 00000001000000df CR3: 000000013e6cf000 CR4: 00000000001407e0
[35614.933305] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[35614.968336] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[35615.002562] Stack:
[35615.012320]  ffffffffa028acc1 ffff880143238a40 ffffffff810d121e ffff880000000000
[35615.047929]  00000000ffffff9c ffff880100000000 ffff88013e2fbf40 0000000000000001
[35615.083193]  0000000000000000 ffff88013e2fbf30 ffffffff81109a1f ffff88014216e5e0
[35615.118747] Call Trace:
[35615.130651]  [<ffffffffa028acc1>] ? unique_id_show+0x31/0x190 [hpsa]
[35615.161826]  [<ffffffff810d121e>] ? handle_mm_fault+0x13e/0x2a0
[35615.190384]  [<ffffffff81109a1f>] ? do_filp_open+0x2f/0x70
[35615.216803]  [<ffffffff812f1967>] ? dev_attr_show+0x17/0x50
[35615.243250]  [<ffffffff81163209>] ? sysfs_read_file+0x99/0x170
[35615.271163]  [<ffffffff810f3929>] ? vfs_read+0x99/0x160
[35615.296130]  [<ffffffff810f4b19>] ? SyS_read+0x59/0xb0
[35615.320469]  [<ffffffff814ac3b2>] ? system_call_fastpath+0x16/0x1b
[35615.350265] Code: 1f 40 00 f0 ff 07 48 8b 3c 24 e9 64 c3 b8 ff 0f 1f 40 00 f0 81 07 00 00 10 00 48 8b 3c 24 e9 50 c3 b8 ff 9c 58 fa ba 00 01 00 00 <f0> 66 0f c1 17 0f b6 ce 38 d1 74 0d 0f 1f 40 00 f3 90 0f b6 17
[35615.441686] RIP  [<ffffffff814ab928>] _raw_spin_lock_irqsave+0x8/0x30
[35615.472973]  RSP <ffff88013e2fbe08>
[35615.490103] CR2: 00000001000000df
[35615.506048] ---[ end trace 9fecfcee13bde62f ]---
Killed

Could You help me to solve this issue ?

Thanks

[PiterParker]

Hi m8,

Try to find drivers from below link, just select right OS.

http://h20564.www2.hpe.com/hpsc/swd/public/readIndex?sp4ts.oid=5387585&swLangOid=8&swEnvOid=4138

Thanks, 

Piotr

[Jimmy Vance]

---

@cseb62 wrote:

Hi,

Sorry for my bad english.

I try to install HPSA drivers on linux 3.10.x.

The linux boot but no access to the sda.

---

Why not use the driver that is included with the 3.10.x kernel?  The hpsa driver is open source and part of the main line kernel tree, you should not need to add it in.

[cseb62]

I'm a neewbie in linux.... someone could send me the hpsa.ko for the 3.10.102 kernel ?

I've just downloaded the kernel and compile the hpsa driver ...I've got the same issue.