ProLiant Servers - Netservers

HP ProLiant ML350 SCSI drive boot order

 
Nathanael Jones
New Member

HP ProLiant ML350 SCSI drive boot order

I cannot figure out how to select which scsi drive to boot from on the same chain. How can I access this option? I see boot controller selection, but I can't find how to acces the controller's boot order itself.
1 REPLY 1
Oleg Koroz
Honored Contributor

Re: HP ProLiant ML350 SCSI drive boot order

What you use SCSI onboard or Array Controller?

On the same chain
For Onboard it start from ID0, .....
For Array your First Array A is bootable

You can't change from Hardware side to boot from Different ID or Array different than A if same chain.
Unless you use Different controller or BIOS allow you to change boot controller for channels where drives connected to each channel.