ProLiant Servers - Netservers

HP Proliant DL380 -does not boot with smart start CD

 
Ashwani Punjabi
New Member

HP Proliant DL380 -does not boot with smart start CD

HP Proliant DL380 -does not boot with smart start CD, need help on that. Cd drive is ok.
4 REPLIES 4
sgunelius
Trusted Contributor

Re: HP Proliant DL380 -does not boot with smart start CD

Some older models of ProLiant servers aren't supported by newer Smart Start CDs. Check the support matrices (ftp://ftp.compaq.com/pub/products/servers/management/smartstart/serversuportmatric.pdf) to determine which version is needed to support your server model.
Ashwani Punjabi
New Member

Re: HP Proliant DL380 -does not boot with smart start CD

I am not able to open this site "( ftp://ftp.compaq.com/pub/products/servers/management/smartstart/serversuportmatri
c.pdf"

Any other...

Re: HP Proliant DL380 -does not boot with smart start CD

lachuzhnikov
Advisor

Re: HP Proliant DL380 -does not boot with smart start CD

In most cases you must use "Clear NVRAM".
You can find this option under Advanced Settings in your setup (RBSU).

We see this issue multiple times, Clear NVRAM always resolve this problem.