ProLiant Servers - Netservers

HP Proliant ML150 G2 bootable problem adapted 2120s controller

 
Farooq Mohammed
New Member

HP Proliant ML150 G2 bootable problem adapted 2120s controller

I have one Proliant ML150 G2 server with adaptec 2120s contoller and two 72GB HDD connected with this contoller and configured raid1 for mirroring. It was works fine for two months,Now I can not able to boot from adaptec 2120s controller and my bios doesn't detect adaptor information during starup the machine and I have fixed new 2120s adaptor and i am getting the same result. If anybody knows about this problem Please reply and also I updated the server bios.
2 REPLIES 2
RaMpaNTe
Trusted Contributor

Re: HP Proliant ML150 G2 bootable problem adapted 2120s controller

Hi, try changing the controller PCI slot, also try a know god controller in this box just to make sure the controller is not the root of the problem, also you can try disconecting the HDDs and boot without them, 1 failed HDD can hang the bus and the entire server.

Thanks
You heve a question... I have an aswer!!!
Nick Sifakis
New Member

Re: HP Proliant ML150 G2 bootable problem adapted 2120s controller

I have the same problem on 2 ml150.The solution is:CHANGE MOTHERBOARD