ProLiant Servers - Netservers

HP TC4100 server not finding SCSi windows 2003

 
Anonymous
Not applicable

HP TC4100 server not finding SCSi windows 2003

Hello all,
I have Recently bought a a TC4100 for use and i cannot get it to find the SCSI in the windows installation. I have try giving the installation different driver with no luck. I have also got the SCSI chip code and got the drivers from the LSI website but these give an error and so do the ones within the windows setup so it will not find the controller.
the system specs are this:
2x 1.13ghz P3
1Gb HP ECC RAM (2x512Mb)
4x 18.2Gb seagate SCSI Hard Drives (all are found in the boot up of the SCSI card)
can anyone shed any light on this.

Thank You
1 REPLY 1
CA1036363
Frequent Advisor

Re: HP TC4100 server not finding SCSi windows 2003

Darren,

I am not sure if you are using the on-board SCSI controller or an HP NetRAID RAID controller. Either way, you should get your drivers from HP's support website, not LSI, even though LSI may make the actual chipset/controller.

Hope this helps.