HPE PROLIANT GEN 10 PLUS

[wanfosin]

I wish to find out whether the community had problem like mine.

I just purchase the HPE ProLiant microserver Gen 10 Plus

I face with the problem on video output.

There is only output from the VGA port.  The maximum resolution is 1600 x 1200 which is not acceptable to me.

There seemed to be no output from the DP port.  I have connected various means and still have no luck:

• DP to DP cable
• DP to HDMI connector and HDMI cable
• DP to VGA connector and VGA cable

[TVVJ]

Hello,

If you are using a known good cable to support DisplayPort 1.1a and the monitor is also working, then you may need to contact HPE Support for further assistance.

Regards,

[wanfosin]

Thanks.

Both cable, adapter and monitor are tested with other laptops and they are all working fine. 

That is where I was puzzling.  What is so special about the DP that it behaves in this manner.