ProLiant Servers - Netservers

HPE PROLIANT GEN 10 PLUS

 
wanfosin
Occasional Contributor

HPE PROLIANT GEN 10 PLUS

I wish to find out whether the community had problem like mine.

I just purchase the HPE ProLiant microserver Gen 10 Plus

I face with the problem on video output.

There is only output from the VGA port.  The maximum resolution is 1600 x 1200 which is not acceptable to me.

There seemed to be no output from the DP port.  I have connected various means and still have no luck:

  • DP to DP cable
  • DP to HDMI connector and HDMI cable
  • DP to VGA connector and VGA cable
2 REPLIES 2
TVVJ
HPE Pro

Re: HPE PROLIANT GEN 10 PLUS

Hello,

If you are using a known good cable to support DisplayPort 1.1a and the monitor is also working, then you may need to contact HPE Support for further assistance.

Regards,

I work for HPE
Views expressed herein are my personal opinion and are not the views of HPE

Accept or Kudo

wanfosin
Occasional Contributor

Re: HPE PROLIANT GEN 10 PLUS

Thanks.

Both cable, adapter and monitor are tested with other laptops and they are all working fine. 

That is where I was puzzling.  What is so special about the DP that it behaves in this manner.