HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers - Netservers
cancel
Showing results for 
Search instead for 
Did you mean: 

HPE ProLiant MicroServer Gen8 wont boot into intelligent provisioning

 
martinius
Occasional Visitor

HPE ProLiant MicroServer Gen8 wont boot into intelligent provisioning

When i turn on the server and press F10 to boot into intelligent provisioning it just goes to network boot and loops until i manualy turn off the server.

3 REPLIES
Jimmy Vance
HPE Pro

Re: HPE ProLiant MicroServer Gen8 wont boot into intelligent provisioning

Try reloading Intelligent Provisioning.  The latest version for Gen8 servers is 1.64B

http://h20565.www2.hpe.com/hpsc/swd/public/detail?swItemId=MTX_88d08b2acdd840ac8a65686e2a

 




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
martinius
Occasional Visitor

Re: HPE ProLiant MicroServer Gen8 wont boot into intelligent provisioning

I dont have a CD/DVD is a normal usb drive okay? And where is the best place to put it? The usb port inside besides the sd card slot or back or front panel? Sorry I am a bit of a noob when i comes to fixing servers :/

Jimmy Vance
HPE Pro

Re: HPE ProLiant MicroServer Gen8 wont boot into intelligent provisioning

There is a USB Key utility inside the ISO image to create a bootable USB drive key.  For windows you may need to install a virtual CD/DVD utility to open the ISO and run the usbkey executable.   You can also install a trial iLO license key and mount the ISO image over iLO https://h20392.www2.hpe.com/portal/swdepot/displayProductInfo.do?productNumber=ILO_TRIALS

 




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!